 |
 |
 |
|
| |
| Xilinx Development Boards |
| |
 Virtex-4 ML401 Evaluation Platform (HW-V4-ML401-UNI-G): |
 |
| The ML401 is a feature-rich and low-cost general purpose evaluation/development platform which provides easy access to resources available on the on-board Virtex™-4 LX25 FPGA device. Supported by industry standard interfaces, connectors, and peripherals the ML401 is a versatile development platform for multiple applications. |
| |
|
|
| Features |
|
- Xilinx FPGA
- Virtex-4 LX XC4VLX25-FF668
- Memory
- Xilinx Platform Flash XCF32P
- 64 MB DDR SDRAM
- 8Mb ZBT SRAM
- 64 Mb Flash
- 4 kb IIC EEPROM
- System ACE™ CompactFlash configuration controller with Type I/II CompactFlash connector
- Connectivity
- JTAG configuration port for use with Parallel Cable III or Parallel Cable IV cable
- 10/100/1000 tri-speed Ethernet PHY transceiver
- Four SMA Connectors
- Stereo AC97 audio codec (Four Audio Jacks)
- Three USB Ports (one Host & two peripheral)
- Expansion header with 32 single-ended I/O, 16 LVDS capable differential pairs, 14 spare I/Os shared with buttons and LEDs, power, JTAG chain expansion capability, and IIC bus expansion
- RS 232 serial port, VGA video port and PS/2 (Two) ports
- Other
- 100MHz oscillator, plus a socket for a user oscillator
- 16-character x 2-line LCD display
- General Purpose IO – Buttons, LED’s, DIP Switch’s
Note: Programming Cable (PC4/USB) is not included & must be ordered separately. |
|
|
|
|
| |
| |
| |
| Virtex-4 ML402 SX XtremeDSP Platform (HW-V4-ML402-UNI-G): |
|
| Powered by the Virtex-4 SX35 device and supported by industry-standard peripherals, connectors and interfaces, the Virtex-4 ML402 SX Evaluation Platform provides a rich feature set that spans a wide range of applications. Designed for use with the Xilinx System Generator for DSP development platform, the Virtex-4 ML402 SX Evaluation Platform provides a great entry-level environment for developing signal processing designs. |
| |
|
|
| Features |
|
- Xilinx FPGA
- Virtex-4 SX XC4VSX35-FF668
- Memory
- Xilinx Platform Flash XCF32P
- 64 MB DDR SDRAM
- 8Mb ZBT SRAM
- 64 Mb Flash
- 4 kb IIC EEPROM
- System ACE™ CompactFlash configuration controller with Type I/II CompactFlash connector
- Connectivity
- JTAG configuration port for use with Parallel Cable III or Parallel Cable IV cable
- 10/100/1000 tri-speed Ethernet PHY transceiver
- Four SMA Connectors
- Stereo AC97 audio codec (Four Audio Jacks)
- Three USB Ports (one Host & two peripheral)
- Expansion header with 32 single-ended I/O, 16 LVDS capable differential pairs, 14 spare I/Os shared with buttons and LEDs, power, JTAG chain expansion capability, and IIC bus expansion
- RS 232 serial port, VGA video port and PS/2 (Two) ports
- Other
- 100MHz oscillator, plus a socket for a user oscillator
- 16-character x 2-line LCD display
- General Purpose IO – Buttons, LED’s, DIP Switches
Note: Programming Cable (PC4/USB) is not included & must be ordered separately. |
|
|
|
|
| |
| |
| |
| Virtex-4 ML403 Embedded Platform (HW-V4-ML403-UNI-G): |
|
| Powered by the 4VFX12 device and supported by industry-standard peripherals, connectors and interfaces, the Virtex-4 ML403 FX Evaluation Platform provides a great entry-level environment for developing embedded designs based on the Virtex-4 FX FPGA. |
| |
|
|
| Features |
|
- Xilinx FPGA
- Virtex-4 SX XC4VFX12-FF668
- Memory
- Xilinx Platform Flash XCF32P
- 64 MB DDR SDRAM
- 8Mb ZBT SRAM
- 64 Mb Flash
- 4 kb IIC EEPROM
- System ACE™ CompactFlash configuration controller with Type I/II CompactFlash connector
- Connectivity
- JTAG configuration port for use with Parallel Cable III or Parallel Cable IV cable
- 10/100/1000 tri-speed Ethernet PHY transceiver
- Four SMA Connectors
- Stereo AC97 audio codec (Four Audio Jacks)
- Three USB Ports (one Host & two peripheral)
- Single-Ended and Differential I/O Expansion
- RS 232 serial port, VGA video port and PS/2 (Two) ports
- Other
- 100MHz oscillator, plus a socket for a user oscillator
- 16-character x 2-line LCD display
- General Purpose IO – Buttons, LED’s
Note: Programming Cable (PC4/USB) is not included & must be ordered separately. |
|
|
| |
| |
| |
| Virtex-5 LX ML501 Evaluation Platform (HW-V5-ML501-UNI-G): |
|
| ML501 is a feature-rich and low-cost evaluation/development platform which provides easy and practical access to resources available in the on-board Virtex™-5 LX50 FPGA device. Supported by industry standard interfaces and connectors, ML501 is a versatile development platform for multiple applications. The video, audio, and communication ports along with generous memory resources extend the functionality and flexibility of the ML501 beyond a typical FPGA development platform. |
| |
|
|
| Features |
|
- Xilinx FPGA
- Virtex-5 XC5VLX50-1FFG676 FPGA
- Memory
- Xilinx Platform Flash XCF32P
- 9Mb ZBT synchronous SRAM,
- 256MBDDR2 small outline DIMM
- 32MB Intel P30 StrataFlash
- 2MB SPI Flash
- System ACE™ CompactFlash configuration controller with Type I CompactFlash connector
- One 8-Kb IIC EEPROM
- Connectivity
- JTAG configuration port for use with Parallel Cable III, Parallel Cable IV cable or Platform USB download cable
- 10/100/1000 tri-speed Ethernet PHY transceiver
- Audio In (2) - Line, Microphone
- Audio Out (2) - Line, Amp, SPDIF, Piezo Speaker
- Two USB Ports (Host & peripheral)
- Single-Ended and Differential I/O Expansion
- Two PS/2 ports (Mouse & Key Board)
- RS232 serial port, Video (DVI/VGA) Output
- Other
- Programmable system clock generator chip
- 3.3V clock oscillator socket populated with a 100-MHz oscillator
- 16-character x 2-line LCD display
- Rechargeable lithium battery to hold FPGA encryption keys
- Temperature and voltage monitoring chip with fan controller
- General Purpose IO – Push Buttons, LED’s and DIP Switches
Note: Programming Cable (PC4/USB) is not included & must be ordered separately. |
|
|
|
|
| |
| |
| |
| Virtex-5 LXT ML505 Evaluation Platform(HW-V5-ML505-UNI-G): |
|
The Virtex-5 LXT ML505 is a general purpose FPGA and RocketIO™ GPT development board.
- Provides feature-rich general purpose evaluation and development platform
- Includes on-board memory and industry standard connectivity interfaces
- Delivers a versatile development platform for embedded application.
|
|
|
| Features |
|
- Xilinx FPGA
- Memory
- Two Xilinx Platform Flash XCF32P
- 256 MB DDR2 SODIMM
- 1 MB ZBT SRAM
- 32 MB linear flash
- 2 MB SPI Flash
- System ACE™ controller and Type I Compact Flash™ connector
- Connectivity
- JTAG Programming Interface
- 10/100/1000 tri-speed Ethernet PHY transceiver
- MII, GMII, RGMII, and SGMII Ethernet PHY Interfaces
- PCI Express® Edge Connector (x1 Endpoint)
- GTP: SFP (1000Base-X)
- GTP: SMA (RX and TX Differential Pairs)
- GTP: SGMII
- GTP: PCIe™
- GTP: SATA (Dual Host Connections)
- GTP Clock Synthesis Chips
- Header for 2nd Serial Port
- Two Audio In (Line, Microphone) and Two Audio Out (Line, Amp, SPDIF, Piezo Speaker)
- Video Input and Video (DVI/VGA) Output
- Two USB (Host and Peripheral), Two PS/2 ( Keyboard, Mouse), RS-232 (Male) – Serial port
- Other
- Programmable system clock generator chip and Provision for user-supplied clock
- CPU Debug Port
- Mictor Trace Port
- BDM Debug Port
- Soft Touch Port
Note: Programming Cable (PC4/USB) is not included & must be ordered separately. |
|
|
|
|
| |
| |
| |
| Virtex-4 XtremeDSP Development Kit (DO-DI-DSP-DK4): |
|
| Developed in collaboration with Nallatech, the FPGA computing solutions company, the XtremeDSP™ Development Kit provides a complete platform for high-performance signal processing applications such as Software Defined Radio, 3G Wireless, Networking, HDTV and Video Imaging. This kit features dual-channel high-performance ADCs and DACs, a user programmable Virtex™-4 FPGA, and is fully supported by Xilinx System Generator for Hardware cosimulation. |
| |
|
|
| Features |
|
- Xilinx FPGA - XC4SX35-10FF668
- 2 independent ADC channels: AD6645 ADC (14-bits up to 105 MSPS)
- 2 independent DAC channels: AD9772 DAC (14-bits up to 160 MSPS)
- Support for external clock, on board oscillator and programmable clocks
- Two banks of ZBT-SRAM (133 MHz, 512Kx32 bits per bank)
- Status LEDs
- Host interfacing via 3.3V/5V PCI 32 bit/33-MHz or JTAG interfaces
Note: Programming Cable (PC4/USB) is not included & must be ordered separately. |
|
|
|
|
| |
| |
| |
| Programming Cables: |
| |
| Platform Cable USB: It is the newest and most flexible USB 2.0 download cable for configuring and programming all Xilinx FPGAs, CPLDs and PROMs. It supports JTAG and Xilinx slave serial modes. |
Rs.10,000/ |
Add to cart |
|
| Parallel Cable IV: It is a cost effective download cable for all Xilinx FPGAs, CPLDs, and :PROMs. It supports JTAG (IEEE 1149.1) and Xilinx slave serial modes. |
Rs.7,700/ |
Add to cart |
|
| |
